7.5" SRX wheels

[02ViperMody44]

I want to replace my rear wheels on my '02 Viper w/ the 79 SRX 7.5" wheels, as I go thru Hyfax pretty quickly. I already replaced the front wheels w/ the Polaris 5.35 wheels. What exactly needs to be done to replace these wheels? I checked the posts, and all that I found is that there is mention that a spacer needs to be cut. But I did not see by how much, or which spacer. Other than that are they any other mods to make them fit? I picked up three wheels w/o bearings, does anyone know what size bearing would fit and fit the Viper axle? Thanks in advance
Rick

 

[Concept Carbon]

They take 6204 bearings, stock viper is 6004 and is alitter thinner, thats why you have to cut the spacers, for the difference.

If your interested I have a brand new 7.5" black wheel with bearing for $15shipped. You could go 4 wheels in the back just cut the spacer for it.

 

[02ViperMody44]

Thanks for the info. And as far as the wheel you have, I plan on doing this, this week, and a little too eager to wait for shipping at this time. Typical male, want it today!
Thanks again!

 

[BornYamaha]

I did this to my viper last fall. Check your wheels to make sure they are not out of round. Two of mine were WAY out. More than 1/8th inch. Back tension nuts barely make it into the nylok but seem to stay put just fine.

 

[02ViperMody44]

Thanks for the advice. I just picked up three new ones from "sledparts.com" for $17.99 ea. I thought that was a good price. Interesting web site, as I thought the parts were priced fairly and shipped that day UPS, got it in three days.

site - sledparts.com is actually listed as: http://www.mfgsupply.com/m/c/index.html