srx98jj
New member
98 srx,..... can anyone help me? Just started doing this today. Around. 80 mph loses power and the temp light flashes.let out of throttle and it goes away. But run it up againg same thing.checked plugs all good everything seems ok? ???
Have you checked for any pull thrus?
srx98jj
New member
Had a pull thru laast year....but no I haven't. .why is the temp light flashing
Rustman
New member
Have you checked engine compression?
-Rustman
-Rustman
SHAMARKEN
New member
had the same prob last year...ended up being my wiring harness....
daman
New member
the temp light is flashing because you could have a servo/power valve problem,get us a light flash sequence.
yamahahaha
New member
^
same
same
srx98jj
New member
Well guys ill try. But it only does it around 80 + mph pretty hard to concentrate on that
mopar1rules
Active member
if you need a new servo motor, pm me, cause i have 2 for sale.
srx98jj
New member
Seems to be just a continuous flash...until you let out of throttle
daman
New member
check servo operation,lower idle to 900 rpms does servo pull open valves nice and steady?
are valves clean AND adjusted properly?
are valves clean AND adjusted properly?
srx98jj
New member
im gonna readjust valves today run & check then repost
srx98jj
New member
tried to adjust power valves today, couldn't get valves to adjust properly not sure if the servo motor is opening all the way. Still has a blink code. Any suggestions? Anybody got a servo motor?
srx98jj
New member
ok, daman and all the help ....this time i took it all apart myself. if ya want it done right , do it your self !!! onevalve pulled thru, other two missing the damn washer so i
they would never adjust anyway !! all better now ....i do my own work nowno matter how buisy i am !!!! thyanks totallyamaha people great sight !!
they would never adjust anyway !! all better now ....i do my own work nowno matter how buisy i am !!!! thyanks totallyamaha people great sight !!
daman
New member
Good to hear,yup thats why NO ONE touches my stuff,they'll have to pry the wrench from my cold dead hands before I'd take my stuff in,lolsrx98jj said:ok, daman and all the help ....this time i took it all apart myself. if ya want it done right , do it your self !!! onevalve pulled thru, other two missing the damn washer so i
they would never adjust anyway !! all better now ....i do my own work nowno matter how buisy i am !!!! thyanks totallyamaha people great sight !!