Boost Bottle & Tors Clearance Problem anyone?

[MountainMax]

Hey guys, I installed a Hauck (square) Boost bottle on my 2002 mmax and found the tors switch hit the bottle, I had to remove it and bypass it, Just wondering if anyone else had that problem??

 

[MrSled]

yes, very common, what we did is turn the plug around and zip tied it in place, then you can still use it.

 

[TJ500]

Hey MountainMax....... I can't even keep my "Sunday best" shoes that clean..... " Mama get me some sunglasses, the glare is killing me ".....

I was just doing a little research on the bottles, mostly just to keep the airbox a little cleaner....Ha Ha...

Just a little concered in having to move the engine on it's mounts however....

Has anyone have any simpler solutions?..... Better start looking for one...

TJ

 

[MountainMax]

Yes, I know, I had reservations too, I found a fix, install a SRX steering colum will clear the carbs. I have a special one ordered with the bend in it and it's 2.5" higher so I can take out my spacer block too......

 

[ikeever]

i had this problem on my 2001 srx. all i did was grind out a little notch for the tors to set in haven't had any trouble.

 

[jwiedmayer]

What is the bundle of wires on the belt cover.

Just wondering its a clean looking underhood.

 

[yamyrider]

WOW MM that is one pertty looking engine you got there.
Very nice.
With all the mods you have done that machine must really fly.
Have you raced against any cats or doo's.
If you have they must scratch there head wondering why you fly by them.

 

[Cracker]

When I installed mine I used hard rubber pads under the posts for the air box. That kept the carbs from hitting the column and as for the tors I was able to tweak the wires up a touch and everything is all good.