Susgestion for clushing SRX 700 2001

[modsrx]

it will pull really good ....i think its something around 52

 

[bluemonster1]

mos..I will be trying out the 8bu's Wed.Will let you know in a new thread how they work..Will you put that cat to sleep please..loll

 

[warrior1100]

Whit this set up i was overreving 8900rpm

89A10, 52.8gr
y-w-y

green secondairy
80 degree
51/43

What i can do to put down my rpm, whit thits set up and wy the rpm was so hi whit this

 

[bluemonster1]

get rid of that helix as starters

 

[mopar1rules]

get rid of that helix as starters

not much wrong w/that helix blue, w/89a10's.

warrior1100, what rivets in what holes.

 

[tofastSRX]

can i get a 54/44 helix from yamaha if so does anyone know the part #

 

[warrior1100]

not much wrong w/that helix blue, w/89a10's.

warrior1100, what rivets in what holes.

INNER .8GR
OUTSIDE 4.7GR

 

[mopar1rules]

can i get a 54/44 helix from yamaha if so does anyone know the part #

yamaha doesn't offer this angle. you need to go aftermarket for this one.

 

[mopar1rules]

INNER .8GR
OUTSIDE 4.7GR

i would switch to red spring in secondary. could try w/w/w spring, and/or even add some weight to the inner hole. what do the rpms do from a dead start, to the end of the run?