mattyg1405
New member
i have a 02 srx and the water pump housing has a small elbow in it with a hose going up to the bottle this elbow came out due to the owner befor me jbwelding it in how it came out i dont know but i now have a new housing and elbow but dont know how to install the elbow is it pressed in or can it be placed in the freezer and heat the housing allowing it to go in and will it leak please help
put red loctite on it and pess it in, let sit 24 hours and enjoy the ride
mattyg1405
New member
thanks i have access to a press should i use it or maybe even just using a large c-clamp or vice its flat i can use a flat plate on the bottom of the housing and the elbow has a flat top ok hope it riding soon i have a f8 to smoke 