timd222002
New member
Any Ideas how to get more weight transfer?
Concept Carbon
New member
take out your no action and use it as an achor for your boat or sell it for scrap, and buy another skid.
To max the transfer with the skid you have, loosen off limiter straps, tighten up the center shock as stiff as possible, loosen off rear shock to mid or all the way depending on your weight, max the gap on your transfer rods and loosen front shocks.
To max the transfer with the skid you have, loosen off limiter straps, tighten up the center shock as stiff as possible, loosen off rear shock to mid or all the way depending on your weight, max the gap on your transfer rods and loosen front shocks.
timd222002
New member
sounds good I'll try it
bravo-guy
New member
Adjustable transfer rods. They are supposed to help out with weight transfer big time.
tedgoesfast
New member
i have a set of bender transfer rods work great improved weight transfer 100 percent
Concept Carbon
New member
he has a viper he dosnt need new transfer rods, viper is long travel unlike the srx and sx's. He would benifit from a set of quick adjust nuts so he can adjust it on the fly. But transfer rods are not needed.
bravo-guy
New member
ok just realized you have a Viper. Buy some quick adjust nuts, Yamaha sold them, but I'm not sure if they do now or not as the Viper was discontinued for 5 model years now. Somebody else would know for sure.