Just a general poll to see if people that have them really like them. I think I might like one but I'm not sure.
I have a Rox 3.5" pivot riser and I love it. I'm fairly tall, about 6'2 and I find the riser really helps, especially with stand up riding.
Stephfg
New member
I have a 3" one and I like it. I raised my seat so I needed it for that, but it's nice for standing as well.
I am 5'9" and I just aded the Powermadd 2" on my viper and I love it.
VIPER TIM
New member
I fabricated a 1" spacer, just enough so the handlebars no loner hit my knees. Cost was less than $10 for new bolts. One of my best mods.
i got a madd pivot and a 1 inch block wouldnt even consider going back
yamakazie
New member
I fabricated a 2" riser and just like viper tim it only cost me $10 for bolts. I'm 6 foot tall and I can almost stand up comfortably. Huge improvement over stock another inch might be better for me though.
srxhair
New member
i just put an 8" riser and pivot adapter from powermadd on my srx 151 its great for standing in powder , its a lot of work and money after changing all cables, brake line and splicing wires
I put on a 3" and sometime think to myself it still isnt enough
Im 6'2
Im 6'2
pipdviper
Member
definately.....definately......definately worth it !!!!! one of my best mods. Keep in mind if your trail riding, it does bring the handlebars up into the wind ! Thats why I installed my handguards. Maybe if your running a tall windshield youll be ok.
SRXBOY99
New member
How big of a spacer can you put on before the stock cables need to be changed on a '99 SRX? Also, if you have to change cables, can you use an oem cable of some sort or what are you guys using?
Thanks!!
Thanks!!
You can add 2" riser before you have to change cables.
I think 3.5 is the max you can go. I have a 3" with stock cables
Sheermadness03
New member
Added a 2" Power Madd riser with stock cables on my 03 Viper and don't know how I rode without it. Very nice for standing up and that's how I ride most of the time.