psi pipe jetting help phazer 2

M

monstercman

New member
Joined
Dec 4, 2008
Messages
2
Age
43
Location
N.S. canada
I bot a use psi pipe for my 85 phazer
so what size main jet wood i need, just what size should I start with
I live at sea level
and need jetting/clutching specs for this set-up
does any one have the PSI spec sheets or the psi jet specs
 
Last edited:
scroll down about four. where the red mad face is. thare is a link for rejetting a phazer with performance pipe...
 
big-kid said:
scroll down about four. where the red mad face is. thare is a link for rejetting a phazer with performance pipe...
Click to expand...

Scroll down where? I was looking for similar info
 
phazer jetting

Years ago ran pi pipe. Was told 147.5's rAn for 2 weeks lean seized hole through piston. THen ran 150's. ran for 6 years pinned down lake WOT. Never a problem. We rode 1000ft level.
 
What type of jets are in the carbs?Are they hex heads or round slot type mains?I have a aaean pipe that I want to use but I want to get the jets first before I take the carbs off as the sled runs great right now.
 
You will need to jet to the recommendations for that pipe. Different brand pipes will have different carb specs. A single pipe will be different than twins. If you do a search here, you should find the exact specs. Try psi single phazer
 
You must log in or register to reply here.


Back
Top