hessracing
Member
Hey guys i just got my powervalves back from richard in indianna he did a great job! Ive got them all adjusted and now my temp light is doing the 7 blinks in 5 seconds i know that there is no way that a valve is sticking they are spotless! i cleaned the two connections to the servo motor also with a wire brush so i know im gettin good contact it the servo seems to open fine when you idle it below 900 rpm and i notice the power valves are working when im riddin the light likes to come on and blink only when im really ridding it hard and around the 70-80 mph range im really stumped why this is happening
bluemonster1
LIFE MEMBER ONLY ONCE!!!
that is telling you that you are shorting out somewhere my friend.Shorting of servo motor is detected according to the manual..Check into it
hessracing
Member
is there a way to fix??
bluemonster1
LIFE MEMBER ONLY ONCE!!!
ask daman..he should know what you should do..I have no experience with the servo electrical issues.