V vtsledr New member Joined Mar 1, 2010 Messages 2 Age 61 Location vermont Mar 6, 2010 #1 Can anyone tell me what the torque specs are for a stock primary clutch on my 94 vmax600 are? Also is there a special way to do it? I heard of some people torquing it down, backing off and retorquing it. Thanks
Can anyone tell me what the torque specs are for a stock primary clutch on my 94 vmax600 are? Also is there a special way to do it? I heard of some people torquing it down, backing off and retorquing it. Thanks
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Mar 6, 2010 #2 Step 1-tighten bolt to 85 ft.lb step 2-loosen bolt back up step 3-re-tighten bolt to 43 ft.lb all this info is here on the site,welcome
Step 1-tighten bolt to 85 ft.lb step 2-loosen bolt back up step 3-re-tighten bolt to 43 ft.lb all this info is here on the site,welcome
V vtsledr New member Joined Mar 1, 2010 Messages 2 Age 61 Location vermont Mar 7, 2010 #3 Thanks. I thought i saw it somewhere. So many sites that I've checked out to find info I forget where I've been.
Thanks. I thought i saw it somewhere. So many sites that I've checked out to find info I forget where I've been.
daman New member Joined May 2, 2003 Messages 10,569 Age 55 Location Bad Axe,Michigan Mar 7, 2010 #4 No problem....