need extended park brake cable for srx for raised bars

M

mikeast

New member
Joined
Mar 11, 2009
Messages
106
Age
55
Location
bc, canada
raised bars 4 inches is there anyway to buy extended ebrake cable to work or is there a clamp kit to make hydraulic brake the park brake ?
been searching all over cant seem to get any luck finding any options :letitsnow
 
Just can the parking brake and tie it down with a stay strap. Uneless you really feel like fabbing something.
 
Ya I took mine off last year and I really haven't missed it at all.

Hey Netefrog wish I made it out for a rip with you this year, saw a few SRX's at Jolly Roger and wondered if it was anyone from here.

Did you get out to any radar runs?
 
john7459 said:
Ya I took mine off last year and I really haven't missed it at all.

Hey Netefrog wish I made it out for a rip with you this year, saw a few SRX's at Jolly Roger and wondered if it was anyone from here.

Did you get out to any radar runs?
Click to expand...

If it was the same day as the poker runs that was probobly me and Tofastsrx. Yep, we went to the runs on Horseshoe lake and all in all we did really good.
http://www.youtube.com/watch?v=8-qO1ZWw5Zk
Thats his winning run in the stock class. My top speed for the was only 96MPH-1/4 mile due to the Ice Attak track spinning half way down the track.
 
ya it was the day of the poker run, you guys must have been in the golden griddle cause the JR was empty.

Is your track the one with the studs built into the lugs? I almost went with one of those, but ended up opting for a regular track and studs. The hookup not so good with the built in studs?

I knew I should have waited around for the owners of those SRX's to come back, I drove right beside to take a look at them.
 
I hav a rx1 parking brake cable. Measure yous and tell me how long the srx one is. The rx mounts under the rotor so it may be longer. Maxdlx
 
maxdlx said:
I hav a rx1 parking brake cable. Measure yous and tell me how long the srx one is. The rx mounts under the rotor so it may be longer. Maxdlx
Click to expand...
the cable from the srx is 36 1/2 inches from end of loop to end of ball
 
You must log in or register to reply here.


Back
Top