bender helix

[YAMMIEGOD3:16]

MIKE, I DON,T HAVE A EXTRA 51-43. WHAT I CAN OFFER YA THOUGH IS I WILL MEET YA AT NYIRP AND LET YA USE MIND TO TEST WITH . 3:16 (yammie tony)

 

[srx154]

deal !! are aftermarket helixes more aggresive than a yamaha factory helix ???? or are they all they same ??? my neighbor has an 03 rx-1, i can steal his for a weekend.

 

[YAMMIEGOD3:16]

YES. ALL THE COMPAINES THAT SELL HELIX,s ARE DEFFERENT. DALTON, BENDER, HAUCK, MICRO BELMONT, etc ARE SLIGHTLY OFF. GUY THAT CUTS THE HELIX,s FOR BENDER RACING AND USE TO CUT FOR MAXXIMUM IS RIGHT HERE IN ROCHESTER. HE WAS REAL CLOSE TO THE SET ANGLES. SO YES A HAUCK 51-43 VS A YAMAHA RX-1 51/43 MIGHT SHIFT SLIGHTLY DEFFERENT. 3:16 (yammie tony)

 

[mopar1rules]

YES. ALL THE COMPAINES THAT SELL HELIX,s ARE DEFFERENT. DALTON, BENDER, HAUCK, MICRO BELMONT, etc ARE SLIGHTLY OFF. GUY THAT CUTS THE HELIX,s FOR BENDER RACING AND USE TO CUT FOR MAXXIMUM IS RIGHT HERE IN ROCHESTER. HE WAS REAL CLOSE TO THE SET ANGLES. SO YES A HAUCK 51-43 VS A YAMAHA RX-1 51/43 MIGHT SHIFT SLIGHTLY DEFFERENT. 3:16 (yammie tony)

makes sense w/same guy cutting bender's helixs and maxx helix's, as they would look identical when comparing angles, from one to another.

 

[srx154]

got a name and a # ?????

 

[YAMMIEGOD3:16]

MIKE, I TRYED FOR YEARS TO BUY HELIX,s OFF OF HIM DIRECT. HE WOULD NOT DO IT BEING THE SUPPLIER TOO THESE COMPANIES. 3:16 (yammie tony)