Helix Question Fellas

[Corey9965]

I am wondering what Hauck or Dalton helix is comparable to the Advant-Edge 48/42? I have a 54/44 Hauck and a 50/42 unknown brand and am gonna try 89a-10's for field and lake racing on my trail sled this winter. So if you guys can give me a close helix to start with it would be much appreciated. Also what primary spring do you guys think. I have a WWW already. I am putting this in a ported SRX 700. Thanx.
Corey

 

[YAMMIEGOD3:16]

COREY, OTHERS WILL ANSWER DEFFERENT HERE, BUT ONLY THING I CAN SUGGEST TO YA IS YOU HAVE TO ACTUALLY FIELD TEST WHAT YOUR LOOKING FOR. SOME HERE SAY THOSE ADVANT CAMS ARE RIGHT ON, I NEVER USED ONE SO I CAN,T TELL YA. 89A-10 WEIGHTS ARE GREAT FOR WHAT YOUR LOOKING FOR, SO IS THE W-W-W, AGAIN YOUR GONNA HAVE TO TEST. 3;16 (yammie tony)

 

[mrviper700]

corey, I can give you a complete setup information to try,rivet placement in the 89a10's,primary spring, helix and rear spring set up to install.

 

[mrviper700]

youll still need to field test as tony says,every sledtheresalittledifferance, riderweight,snow type, track type,etc. but I can get ya real,real close on rpm.

 

[Corey9965]

Sounds great, Don. The motor ships out tomorrow so you should have it by the weekend barring any unforseen circumstances. That's one of the reasons i wanted to make the trip out by you to put the motor back together. I wanted to pick your brain on clutching.