mopar1rules
Active member
does anyone know off hand, if a 68L chain will work for 22/40 gearing? i know the chart says you need a 70L chain, but it also says that a 70L chain is needed for 23/38 gearing, when i know of guys that still run the 68L chain w/that setup, as the 68L chain fits/works. thanks guys.
YAMMIEGOD3:16
Active member
JOSH, I RAN 21/40 FOR 660 ICE DRAGS USEING THE 70 LINK CHAIN. I DON,T THINK THE 68 WOULD GO ON. ALL YOU CAN DO IS TRY IT. 3:16 (yammie tony)
valin
Active member
Nope. You are 1 tooth too high for a 68L. You can only run a max of 61 teeth on a 68L.
mopar1rules
Active member
valin said:
Ok, thanks guys.
That's good to know valin....61 teeth max for 68L chain. What is the max for a 70L chain?
valin
Active member
I'm pretty sure it's 65 teeth.
Can you run 20/40 with a 70 link on grass ? or would the 68L be better
mopar1rules
Active member
needaSRX said:
68L would be better, as you wouldn't have as much slack to take out, as you would have when using the 70L chain.
I'm running 23/42 with a 70 in my srx. It's pretty snug. Don't know about adding another tooth, but honestly never tried.
YAMMIEGOD3:16
Active member
THE KEY TO RUNNING THE RIGHT CHAIN REALLY AIN,T '' SNUG ''. THE KEY IS HAVEING ATLEAST AMOUNT OF BEND AS POSSIBLE. 3:16 (yammie tony)
Yep. And I've got very little bend