Too good of a price to pass up

A couple of bucks

A couple of bucks

VIP Member
Joined
Jan 17, 2009
Messages
6,386
Age
59
Location
Ogle County Illinois USA
Had to pony up some cash for a track. Have been torn between a Hacksaw and a Predator. But have always liked the Aggressor but couldn't bring myself to buy it cause it's so darn expensive.
Of all company's.....Dennis Kirk came through and clearanced all of their Aggressors. Got it when they just put them on sale for $389.
Now I know many of you are probably shaking your heads......but that thing is built like a brick shithouse. Should last for a good long time. I'm happy. I believe it weighs the same as the Predator.
 
A couple of bucks said:
Had to pony up some cash for a track. Have been torn between a Hacksaw and a Predator. But have always liked the Aggressor but couldn't bring myself to buy it cause it's so darn expensive.
Of all company's.....Dennis Kirk came through and clearanced all of their Aggressors. Got it when they just put them on sale for $389.
Now I know many of you are probably shaking your heads......but that thing is built like a brick shithouse. Should last for a good long time. I'm happy. I believe it weighs the same as the Predator.
Click to expand...


I've had the same the 1" Aggressor on two different sleds. The track is nearly 12 years old and is still in great shape.

It is a beast but durability has been second to none. Top speed suffered but if you're after durability you won't be disappointed. It also shines on the lake when the starting line gets all chewed up. The beefy lugs do not bend.

144 diggers inside and out... no tear-outs.
 
snomofo said:
It is a beast but durability has been second to none. 144 diggers inside and out... no tear-outs.
Click to expand...

That good to know. Was skeptical about Kimpex tracks before I ordered. I believe the 1.2 AGGRESSORS were clearanced even more that the 1 incher that I got.
 
A couple of bucks said:
That good to know. Was skeptical about Kimpex tracks before I ordered. I believe the 1.2 AGGRESSORS were clearanced even more that the 1 incher that I got.
Click to expand...


Yeah, I too was skeptical of the Kimpex brand but it has turned out to be more than I expected.

Don't know if spraying it every spring with silicone and taking the tension off during storage has helped, but it still looks new.
 
I just bought a brand new 1.25 ripsaw for my srx it was only $369 shipped and I got it in 2 days. Tracks Usa.com they are out of minnesota and are the cheapest I've found. That was there everyday price not a sale price.
 
So we got her in this weekend. Good night what a HUGE difference. Will have to tighten the limiter straps back up. Every time I pinned the throttle, the front end would come ALL of the way up. As in about 11:00 or better. Put a smile across my face a mile wide. And w/o studs.
 
Last edited:
Took the OE track to work. Wanted to weigh it on the PITNEY BOSE. Now the track has approximately 1/4 of the outside lugs ripped off, but the center is in great shape. Probably @ 96 studs w/ Airlite backers and it weighed @ 36.3 lbs.. Though for sure it would weigh more than that especially with the studs .
 
I ran 1 on my edge and that is the best track I ran, that thing digs like a mother, and with 4000 miles not a single peice missing, youwill love that track and you can run it loose cause it don't stretch. Good choice, the ripsaw's are junk imo.
 
rx1jim said:
Mr. Bucks, what lug height did you get on the agressor track?
Click to expand...

Didn't want to go up to the 1.2 as they weigh @ 4 lbs more than the 1 incher. I don't know if I'm thinking right but here is how I decided.....1 in lug x 15 inches wide x 48 pitches = 720 inches of lugs/pushing surface.
Just as a comparison, the ENERGY has......1 in lug x 15 inches wide x 24 (every other staggered)= 360 inches of lugs/pushing surface
 
You must log in or register to reply here.


Back
Top