A couple of bucks
VIP Member
What is the function of the tube or "handle" as I call it, on the sx mufflers. They come out of the top and go nowhere.
"Handle" on muffler
- Thread starter A couple of bucks
- Start date
bluemonster1
LIFE MEMBER ONLY ONCE!!!
a handle.... 
It's called a quarter wave tube and is used as a noise cancelling and sound tuning device. Not a handle, BUT, could be used for one LOL!
musselman
Active member
Has anyone removed this "noise canceling device"? I could use a little bit more noise.
700max
New member
bore out the baffles or cut it open with a zip wheel cut out the baffles and weld the cover back on. No tickets sounds a little throaty like a truck with dual exhaust almost. I did my own, I'm not to far away if you want it done let me know.
BRAAAPPP420
New member
could you do that with a viper silencer? what would that sound like?
musselman
Active member
Anyone have a sound clip of this done to a readhead stock can? Very interested in doing this.
SWEDE
New member
There used to be a sound clip of a bored can over on the technical pages
musselman
Active member
Well I have a bored can right now, I was just wondering about that resonator tube.
A couple of bucks
VIP Member
Viper_Dave said:
Thanks Dave....it was a question that I've wondered about since I got the sled .
musselman
Active member
Well I was curious so I went and cut my "handle" off and welded a cap on it. I will post a vid after the weekend when I fire it up.
A couple of bucks
VIP Member
So Dave...I looked on the H/S football schedule the other day, and it looks like it's Durand at Polo on 24 Sept.