A couple of bucks
VIP Member
Need your best guess on carb settings. Will have the following done when I get done with her this fall.
1. Carbon tech reeds (335LT)
2. Reed spacers
3. Boost bottle
Thanks
Dannyboy
1. Carbon tech reeds (335LT)
2. Reed spacers
3. Boost bottle
Thanks
Dannyboy
Don,t do the aftermarket reeds or boost bottle.
Do the spacers.
Run 142.5 main jets strate across
drop needles 1/2.
stock fuel screw settings.
Do the spacers.
Run 142.5 main jets strate across
drop needles 1/2.
stock fuel screw settings.
Turk, do you feel that the aftermarket reeds aren't any better than stock? Just curious as I was going to do reeds and spacers on my sled.
The stock yamaha reeds are extremely good. Aftermarket reeds is a waste of $$$$.
A couple of bucks
VIP Member
Turk said:
Looking in the D/K catalog to order the 142.5s. There are two different kinds of mains in there and neither is for a TM/TMX Mikuni. Need some guidance.
Hammer Time in Belvidere Dan. They have them. In stock too...
A couple of bucks
VIP Member
SXRider7Hundo said:
Roger that, they decient to deal with ?
Yeah. Just tell them the sled they should have all the info on it...