Track for a 2000 SRX

R

rx1jim

New member
Joined
Feb 17, 2008
Messages
925
Location
Poughquag, NY
I want to change the track on my 2000 SRX. The stock track has a lot of mileage on it and it is beginning to show its age. What do you guys reccommend for a replacement track? I do not plan on studding the new track, the stock track I am running now is not studded. Thanks!!
 
what size? 1" and what if you do want to stud?

i want to get a new track but i do not want to change drivers and etc, so i was thinking 1" track 1.25 studs and id be good to go, i just would like to know whats the best 1" track? and i wonder if i will lose any top speed ?
 
u wont be be able to run 1.25 studs on a srx unless u do 8 tooth drivers. somewhere around a 1 inch lug with 1.080 studs is the best you can do. I have the stock yoki track and is put on backwards for better traction with 192 studs
 
I have a 2000 SRX with a .75" Camo pre drilled track. 96 1.25" chisels with no issues. Previously had original .75" track with 96 1.25" trail studs.
 
For groomed trails the ripsaw is amazing, mine has nearly 6000 hard miles on it and still looks great.I've even ran it in some pretty marginal conditions and still no lug damage or heat issues to speak of.Its good all around especially at 136" like I'm running, but powder snow would be its weak point.
 
You very much welcome,, I know the seller and he is a super nice guy.. He bought a trailer from me about 4 years ago. He might cut you a deal on it
 
You must log in or register to reply here.


Back
Top