Viper Questions

K

kampkoleviper

New member
Joined
Jan 18, 2009
Messages
7
Location
Pine Grove PA
I just rebuilt my viper put the motor in, started it did a few hard pulls to seat the rings, now it responds well, but when I leave off the throttle it has to come back to idle before it will go and is this the TORS tripping, I did have the motor out the sled? also which plugs should I be running to help avoid another meltdown and what octane should I be running. Thanks in advance.
 
I think the stock plug is a BR9ES on the viper, I ran 87 last year with no issues a couple times but I prefer to run premium. There is a gas station near my house that has a premium with no ethanol, which is what I like to run when I can.
 
kampkoleviper said:
I just rebuilt my viper put the motor in, started it did a few hard pulls to seat the rings, now it responds well, but when I leave off the throttle it has to come back to idle before it will go and is this the TORS tripping, I did have the motor out the sled? also which plugs should I be running to help avoid another meltdown and what octane should I be running. Thanks in advance.
Click to expand...

we can't tell you that, unless you tell us what engine mods were done and what your compression ratio is.
 
You must log in or register to reply here.


Back
Top