SRX ft shock help

[super1c]

Looking for some measurements for front SRX shock eye to eye. Did a search but its all for rear shocks. I need eye to eye extended and compressed. And eyelet diameter. Even a shaft length when extended will be fine instead of compressed length. Thanks a ton guys. CCC

 

[snowdad4]

for the kyb's, not ohlins, extended: 345mm, compressed: 246.5mm. eyelet id is around 12mm. measure any bolt on the rad rods as the same diameter. 1mm =.0394".

 

[motorhead327]

Center to center of eyelet is 13.5 inches and inside diameter is 10mm.

 

[super1c]

Thanks guys, thats what i needed. CCC