Re-Cover Seat

T

The Grand Pooh-Bah

New member
Joined
Oct 29, 2010
Messages
11
Age
66
Location
Moscow, ID
Has anyone here re-covered their seat? If so do you have any tips you'd like to share.

My seat had a few cuts and the stitching was coming apart. I pulled the seat and discovered the plywood base was rotted. Now that I have the plywood removed and the cover pulled off I'm at the point of ordering a new cover off e-bay $103, ordering upholstery online (??) and making my own, or taking the seat to an upholstery shop.

I'm leaning towards ordering the upholstery online and having the wife dis-assemble the cover to use the pieces as a pattern. Can this be done on a regular sewing machine with a heavy duty needle? What kind of thread would you use?

There is some mold on the foam. What should I use to kill this...bleach??
 
I would buy a cover. I am cheap and I would still advise doing this. I think you will be happier with the results. Dennis Kirk probably has a cover on sale and free shipping. I don't think I would use bleach on that old foam.
 
They don't have a cover for my seat. The only place I have found one is on ebay ($103) or a factory cover for $200. Ive seen the material for $18-20 per yard.
 
I would buy one. I remade one for an older sled that they no longer made covers for and it was alot of work. Buy one if you can. Did I say it was a lot of work?? It IS!! So again... Buy one, whether it is a replacement from Denny Kirk or one from Ebay, or if you like to spend alot of money, one from the dealer.
 
You must log in or register to reply here.


Back
Top