Belt riding in secondary question

S

Spinner18

New member
Joined
Jan 16, 2006
Messages
315
Age
37
Location
Virginia, MN
On my srx is the belt too supposed to be below the edge of the clutch? It sits down about 1/8 inch from top of belt to edge of clutch. My polaris's always had the belt sticking above the clutch, just checking...
 
I also have a helix I would like to know the angles on. I could text someone the pics of it. 218-780-0460 just ask for helix pics and Lmk If you know the angle...
 
the belt is suppose to sit a little above the secondary. i think mines about an 1/8" above.
 
they are usually .5 and 1.0 mm washers.If you have something laying around,will do..as long as the opening is large enough.I guess I can get of my azz and go to the garage and snap a pic or 2..lol
 
That was perfect blue! Maybe the belt sitting low is a reason my midrange punch seemed kind of weak last year. Will get some shims and try it again! :)
 
i think i got the belt set just about perfect, if i run my finger from the top of the clutch sheave, i can just feel the belt cogs sticking above the top. not a whole lot, but definitely sticking above. going to go out and try tomorrow hopefully, might add a thin shim, might not. will have to see what the speeds and how the midrange feel :) first ride of the season coming soon, sucks finding broken parts before you even get out to ride and have like 2.5-3 feet for the past month...
 
You must log in or register to reply here.


Back
Top