This summer I bit the bullet and bought a kit. I know most of you say that the best kit is the one you make up yourself but I don` have alot of time for testing as I work year round evenings weekends etc. It consisted of a hauck g helix 89a-10 weights (cant remember exact weight off hand) and hauck black primary spring with a hauck silver secondary set at 3 and 3. Based on your years of testing and knowledge what do you clutching experts think of this setup.
srx 700 hauck clutching...
- Thread starter Netefrog
- Start date
tofastSRX
New member
no helix ?
tofastSRX
New member
lol what angle?check there web site
mopar1rules
Active member
Sounds decent and close to one of turk's setup in the tech pages. I think that silver spring is a little much in my opinion.
Rustman
New member
I find it funny how all the best SRX weights seem to all have been used in vmax-4's. Must have something to do with the similar sled weight, hp, and target RPM's.
YAMMIEGOD3:16
Active member
I AGREE ON THE WEIGHTS, (8bu, 89a etc). BUT NOT ON THE WEIGHT. VMAX 4 IS HEAVEY. lol. 3:16 (yammie tony)
Well I still have the loaded 8dn-20s, www primary spring, stock 47 helix, stock red secondary spring and green spring. So with the little bit of time I do have and the clutch peices I am building up I'm sure i can come up with something that works. Any suggestions so far???
I've had two sleds (98 SRX 600 and 02 Viper)with Hauck's stock clutch kits and I found them both to be spot on. I'm a believer.
Spinner18
New member
what kind of increases have you found, acceleration, increase of top end? just curious.
tofastSRX
New member
netefrog you coming over for the 800 mxz motor build tonight?