Sc-3 / Srx 7 Install Complete

Argento102

Argento102

Member
Joined
Sep 18, 2009
Messages
220
Age
54
Location
Port Hope Ontario
Anybody who wants to install an Sc3 into their Srx7 know it's a
pretty straight FWD install. BLUEWHO, thx for the tips. Finally
tossed that boat anchor No-Action.

Set-up / tweaking tomorrow with the Iantomasi clutching set-up.
Anyone needing help PM me. ;)!
 
Argento102 said:
Anybody who wants to install an Sc3 into their Srx7 know it's a
pretty straight FWD install. BLUEWHO, thx for the tips. Finally
tossed that boat anchor No-Action.

Set-up / tweaking tomorrow with the Iantomasi clutching set-up.
Anyone needing help PM me. ;)!
Click to expand...

Hey, let us know how it rides ok? I have an sc3 sitting in my garage that I plan on putting in my sled. Do you know what springs/shocks yours has in it. I figured out after the fact that I need some stiffer springs and at least a shock revalve (impulse buy but the skid is in great shape).
 
thunder66 said:
Hey, let us know how it rides ok? I have an sc3 sitting in my garage that I plan on putting in my sled. Do you know what springs/shocks yours has in it. I figured out after the fact that I need some stiffer springs and at least a shock revalve (impulse buy but the skid is in great shape).
Click to expand...

Will do Thunder. It WILL have a C46 by weeks end. The 3 is out of
an 03 Rev, so the shocks are now stock. I just need 2 hours to test it,
and get it set up. The C46 is growing flowers its been sitting on the shelf.
 
Argento102 said:
Will do Thunder. It WILL have a C46 by weeks end. The 3 is out of
an 03 Rev, so the shocks are now stock. I just need 2 hours to test it,
and get it set up. The C46 is growing flowers its been sitting on the shelf.
Click to expand...

Sounds good, what's a C46?
 
bluewho said:
:worth: Does this mean i dont git your blue windy!!!
Click to expand...


REALLY SWAMPED AT WORK NOW BLUEWHO FFS. NEED TWO HOURS FREE
TO SNAP PICS ;)!

Doesnt mean I dont care about your feelings
 

Attachments

  • middle-finger-retro.jpg
    middle-finger-retro.jpg
    5.7 KB · Views: 97
thunder66 said:
So does that shock have the right valving and spring rate to work in that skid on that sled? Is it the correct length?
Click to expand...


I'm 205lbs loaded with gear. Its sitting about right. I need to check for
transfer now. Limiter straps have one hole left, might have to let her out
more. I dont want approach angle too high. Till we test her this is all academic.
 
The 46 in C46 refers to 46mm instead of C36 which is 36mm. This shock handles far more heat and thus is less prone to fading.
 
Ding said:
The 46 in C46 refers to 46mm instead of C36 which is 36mm. This shock handles far more heat and thus is less prone to fading.
Click to expand...

That's the kind of info I am looking for... have a SC3 out of a 2002 Doo and I am want to put together a shock/spring package that will stand up to a agressive 210lb rider.
 
You must log in or register to reply here.


Back
Top