Power Inc Can...

Netefrog

Netefrog

New member
Joined
Jul 28, 2009
Messages
853
Age
40
Location
ON, CA
So my Power Inc can arrived in the mail today. But there is one problem, it doesn't fit. Has anybody else had any issues similar to this with power inc stuff??? Did they make two silencers??? Maybe one for their pipes and one for the stockers???
 
How much off is it. I had one and had to adjust the end of my pipes to make them fit. My pipes stock were a bit short by about 1/2".
 
This one is about 2" off. It's pretty bad. I would have to heat it and bend it. 10 miles off of where it should be. The two pipes on the top slip in but the bottom one is the one giving me issues.
 
Netefrog said:
This one is about 2" off. It's pretty bad. I would have to heat it and bend it. 10 miles off of where it should be. The two pipes on the top slip in but the bottom one is the one giving me issues.
Click to expand...
I talked to the guy I bought it from. He said it came off a 98 srx with stock pipes.
 
mopar1rules said:
i have a power inc silencer as well. i haven't used it yet, but will check fitment for you on mine when i got time.
Click to expand...
Mopar can you post a pic of yours?
 

Attachments

  • !B4oJrm!EWk~$(KGrHqZ,!i!Eyb-CgySwBMqjh,jqgg~~_12.jpg
    !B4oJrm!EWk~$(KGrHqZ,!i!Eyb-CgySwBMqjh,jqgg~~_12.jpg
    18.2 KB · Views: 5
  • !B4oJ6lQBGk~$(KGrHqR,!jQEybwhilyBBMqjiDugh!~~_12.jpg
    !B4oJ6lQBGk~$(KGrHqR,!jQEybwhilyBBMqjiDugh!~~_12.jpg
    21 KB · Views: 4
I sure can. I will post pics tomorrow when I go in the shop for a while. Does anyone know if I can upload pics of the silencer on here from my phone.
 
I have one also and mine fits pretty darn good. I can try to post a pick in the next couple days as I am getting my sleds out of storage!
 
tofastSRX said:
You Bought Another Paper Weight Netefrog ??? Lol Do Your Self A Favour And Keep The Stock One On Bud.
Click to expand...

I'm addicted to the sound. + power incs maintain stock power levels.
 
i think 2000-up does hook up the same way ....well i know they don't have the same connector at the end of the pipe
 
my stock can is going back on, I have the Hauck Growlers on and the sleds that I was beating last year are now getting by me in 660 ft I know they sound great and all but this is just for riding now and music too my ears once and awhile
 
Netefrog said:
This one is about 2" off. It's pretty bad. I would have to heat it and bend it. 10 miles off of where it should be. The two pipes on the top slip in but the bottom one is the one giving me issues.
Click to expand...

Mine wasn't off that much but did give me some trouble. Try connecting the pipes to the can first, then move the can into place and bolt down. Also, because this can does not support the bottom pipe like the stock one that may be restricting the pipe from reaching the can. The stock can has a support with rubber near the front edge.
 
I believe the issue is that this can is designed for the 98 sleds and my sled is an 01. Didn't the exhaust change at some point?
 
jaydaniels said:
Mine wasn't off that much but did give me some trouble. Try connecting the pipes to the can first, then move the can into place and bolt down. Also, because this can does not support the bottom pipe like the stock one that may be restricting the pipe from reaching the can. The stock can has a support with rubber near the front edge.
Click to expand...

This is a good way to go about mounting it to insure that is fits nice.

Netefrog said:
I believe the issue is that this can is designed for the 98 sleds and my sled is an 01. Didn't the exhaust change at some point?
Click to expand...


Im pretty sure the exhaust is the same on all srx models and years. Here is a picture of mine install! Sorry about the dirt...lol my sled is just coming out of storage!
 

Attachments

  • IMG_9248.JPG
    IMG_9248.JPG
    99.6 KB · Views: 3
  • IMG_9248.JPG
    IMG_9248.JPG
    99.6 KB · Views: 5
  • IMG_9250.JPG
    IMG_9250.JPG
    105.7 KB · Views: 3
98 Srx

98 srx was a little different than other years. I know with the 98 stock pipes you have to use a 98 stock can. Other years don't quite fit right.
 
Netefrog said:
I believe the issue is that this can is designed for the 98 sleds and my sled is an 01. Didn't the exhaust change at some point?
Click to expand...

Only difference is the 98 pipes didn't have adjustable ends. Pretty sure the cans are all the same stock and Power Inc.
 
You must log in or register to reply here.


Back
Top