Can anyone describe to me what to look for while conducting a Ohms test for the stator. 02 Viper ER. I have no spark and I have ruled out most wire connectoin except under the motor for the main harness but would like to check the stator. Can anyone help.
Stator ohms test
- Thread starter LimoDave
- Start date
hereismylife
Active member
Hello and 
to the forum....
I think that might be in my link below......
to the forum....I think that might be in my link below......
Thanks for the Welcome Mat and thanks for the link. I did search the link but failed to find anything. If it was in the electrical section for some reason it would not load for me. That was only section that would not load. Maybe you can repost it.
I did an Ohms check from the Stator. 2 connectors. One with 3 white wires and one with 2 wires (white with green line and white with red line). The 3 white wires all had 1 to 0 readings between them the 2 wire connector had no read at all from white/green to white/red. Any ideas?
http://www.totallyamaha.net/forums/showthread.php?t=57116&highlight=viper+high+beam
check this link i believe its what i used for my diagnoses.
check this link i believe its what i used for my diagnoses.
hereismylife
Active member
LimoDave said:
I will fix it when I get home....
Thanks CaptnViper. That is what I needed. Those specs are sure to help. I believe I have a bad stator. JK Auto Thanks as well for the link and help. You guys are great to offer the help. Thanks TY for a great website and help folks. Merry Christmas to All. Happy and Safe Sledding to all.