m-10 hyfax

[lowmilevmax]

I have the metric m-10 and need new hyfax. since the snow has melted away for now I figure it is a good time to do so. Question is. Can I use the hyfax from another skid for this (like a polaris M-10) or do I have to go through FAST. I would prefer to get local since I have a gift card to the local dealer.

Thanks Jason

 

[amatosrx]

same as polaris

 

[lowmilevmax]

any polaris?

 

[grapeape]

The metric M-10 takes skidoo hyfax, the sae or polaris m-10 takes polaris hyfax

 

[T.S.U.Filmz]

Metric M-10 uses Profile 8 ski-doo slides. just slide a set of yamaha proaction slides on the rails they fit

 

[6.0l zr2]

x2 on the proaction slides. Polaris m10 slides will not work

 

[BETHEVIPER]

There seems to be some confusing statements in here along with some correct ones.

metric rails are different than standard m10 rails
metric rails take mid 90s formula 3 slides
Pro action yamaha slides will fit if you remove the skid and remove about 1/32 from the bottom and from each side.
If you try to slide them on with out doing this, some will jamb. If you are lucky enought to find a loose set, they might make it around the corner, if not, your going to get them jambed on there.
I would recomend removing skid and grinding as that profile of slide is getting harder to find in stock. Yamaha slides are very common.

 

[6.0l zr2]

yes they will jam dry. but a little penetrating oil or any lube for that matter will let it make it around the bend with a little tap on the end.
(admittedly, i put them on with the suspension out)

 

[lowmilevmax]

I pulled the old hyfax off. I will bring them down to the dealership tomorrow.