Pull-through prevention with pictures

[A couple of bucks]

Bare with me guys.
http://www.hamuniverse.com/antfrac.html
3/16= .1875
9/64= .1406
Which gives you a wall thickness of .0468
So if you found 3/16ths tubing w/ a wall thickness of .035, you shouldn't even have to drill out the I.D..
This DOM tubing is stronger than stainless anyway.
https://stockcarsteel.com/dom-tube-3-16-o-d-x-035-wall.html

I don't have any sleds w/ P/Vs so I'm just spitballin.

 

[JCHMIEL]

Thanks to the guy who originally posted this. I have a 01 SRX and all 3 valves pulled through. This was a simple fix and worked really well!!

 

[A couple of bucks]

Preventative maintenance season bump.