04 yamaha viper s spitting anti frezze out overflow hose

[yami lover]

my 04 viper s spits anti frezze out of the over flow hose when i pin it across the lake i never overheat and it doesnt always happen can someone help

 

[jboar]

Maybe to much antifreeze in the bottle.

 

[yami lover]

Maybe to much antifreeze in the bottle.

when the sled is cold the antifreeeze level should b at cold level right

 

[2datrl]

My Viper S seems happiest with the coolant slightly below the "cold line".
If I add more, it magically disappears.
2datrl

 

[jboar]

Mine is the same, if I top it up it spits some out the first time I go out then It is fine after that

 

[yami lover]

My Viper S seems happiest with the coolant slightly below the "cold line".
If I add more, it magically disappears.
2datrl

but i still cant get anti freeze to come out the bleeder screw on the cylinder hear beside the carb heater switch can u

 

[Madmatt]

Too much

Yup, you'ver got too much antifreeze in it. When it is full to the "cold level" it will spit a little out and correct itself. It should be about half way between the bottom of the bottle and the cold level line when cold. As long as you can see a little in the bottle you will be fine.

Madmatt

 

[yami lover]

Yup, you'ver got too much antifreeze in it. When it is full to the "cold level" it will spit a little out and correct itself. It should be about half way between the bottom of the bottle and the cold level line when cold. As long as you can see a little in the bottle you will be fine.

Madmatt

Thanks man i will try it out today and see what happens

 

[suzuki750]

Mine was also doing that but found that the radiator cap was at fault for that.