Need track advice please

[dirtybeacher]

Hey gang, I have found a track locally to replace my tired rubber on my mtn. vipe. It is from a Summit apprantly, and is clipped every other window. I am running stock drivers. I think it should work, but would appreciate any info you all may have.

Thanks, Rob

edit - this track is a 144 x 15 x 2, same as my stock track

 

[Stephfg]

Is the track pitch the same?

 

[sockeyerun]

You need to get the number off the track and find out what the pitch is, like Stephfg just mentioned. I'm thinking it will fit. Put the # and skidoo in google search and you should be able to find out. 2.52 is the correct size. Soc

 

[dirtybeacher]

He didnt know what the part number was - he couldnt find it, and I didn't ask him about the pitch. Will call him for the pitch. I thought Summits were 16", maybe the older ones were 15 ?

Do i have to run a 2.52 pitch ? Couldnt I run a 3" ? My sled is setup for offtrail and I don't care about trail performance.

 

[600srxman]

that would be a 2.52 pitch track

 

[Netefrog]

Yes you have to run a 2.52 pitch track unless you change the drivers.

 

[2ooosrx]

If it is 144 it is 2.52. Or measure the center to center on the lugs.
Bruce

 

[dirtybeacher]

Yes you have to run a 2.52 pitch track unless you change the drivers.

Thanks everyone !! I didn't know that the pitch effects the type of driver. I don't want to change drivers so I will make sure to measue the pitch and of course the width and lengths before I buy it. I am at work and havn't had time today to thoroughly search out info, thanks again for the quick replies.