TopGunnSrx
New member
Getting fed up with my srx, ever since last year I havent been able ride it and have been stuck on the rx1. The same issue is killing me here, I pulled the wiring harness and double checked it, its fine. I pulled the carbs cleaned them like every other year, didnt help. Now I didnt clean the internal screen under the float needle. When I fire the sled it fires up and quickly looses the pto cylinder, if I flip the choke for a second itll fire and then quit again. If im riding it will run ok at a steady speed at say 6-7k rpms. If im cruising and go to stab the throttle it will cut out sometimes and sometimes itll run normal. Im convinced its gotta be the carb again, but what do you guys think?
Ive replaced plug caps, swapped cdi's, and threw on a new coil with no change. It had top end brand new not too long ago with oem parts, and ran great, untill last season when this issue started.
Im ready to trade it in for another street bike.
Ive replaced plug caps, swapped cdi's, and threw on a new coil with no change. It had top end brand new not too long ago with oem parts, and ran great, untill last season when this issue started.
Im ready to trade it in for another street bike.