Carbides

O

Oultman

New member
Joined
May 4, 2003
Messages
29
Location
PEI, Canada
Website
www.holysheet.8m.com
Hello everyone,
I am going to replace my carbides this year, the last set i had got were 4", since then I have added 96 studs to my sled, I was wondering if I should go up to 6" carbides now or stick with 4. I'm riding a '99 SX 700, I do mostly trial riding. Thanks
 
I'd recommend a type 2 6" Bergstrom with a set of skisavers. The bars last forever, and the skisavers give those nasty stock skis some bit in the corners. Like 600% more bite than stock steel skis! Something like that...
 
On my C&A's, I've got the 1/4" right now, I've tested them all. With the thicker savers, you'll need to make sure they are the same width as the keel. C&A's have a narrower keel than stock Yami skis, and I experienced splitting in low snow conditions (first ride '01)

I think Scott makes them for the width of your keel now, ask to be sure. Did you tell him John Guest sent ya?hehe
 
You must log in or register to reply here.


Back
Top