any solution for oil blowing out of the power vavle cable

[NY_SXR700]

98' SRX has a ton of oil all over the exhaust side. It looks like the problem is the power valve cables are leaking. Is there a fix for this?

 

[needaSRX]

Change your o-rings inside the valve housing should fix your problem

 

[NY_SXR700]

Is there anything special about them? I have an O-ring kit with hundreds of different sizes in it. If these are just O-rings I can fix it today while the motor is on the bench. tks doug

 

[NY_SXR700]

After looking at the part online... it looks like it's a custom oil seal. No fixing that on the bench today. Thanks, Doug

 

[Dr. FeeLGooD]

I bought o rings at a farm implement dealer. 7 cents each lol. Wonder what yamaha wants for them. Look like just an ordinary o ring to me.

 

[mrviper700]

theres a seal in the housing and a o-ring on cable, I would replace both.

 

[snopax]

Had the same problem. There is an oil seal on the engine side of the pv housing that needs to be replaced.

 

[SRX_700]

Had the same problem and it was leaking oil because of a pull thru.

 

[99cobrasvt]

isnt there a weep hole under the powervalve what is it for mine leaks there

 

[snomofo]

theres a seal in the housing and a o-ring on cable, I would replace both.

X2 - if it's getting past the o-ring, it's getting past the seal.