twin pipes

00sxrjoe

00sxrjoe

Active member
Joined
Nov 22, 2008
Messages
1,149
Age
43
Location
Maine
Came across these pipes for vmax twin strut sled I belive. Are they any good? They are GYT.
 

Attachments

  • TWIN pipes.jpg
    TWIN pipes.jpg
    5.4 KB · Views: 105
Those are GYT twins and do make power, and as you state they were designed for the '94-'96 vmax chassis. @ 5K rpm you better be holding on cause they pull like a freight train.
 
In the pic the flanges are missing that attach it to the cylinders if you get them make sure those are in place, i see them for $200 a lot, just a note you will need to reclutch as metioned hold on at 5300-7200 you take off like CRAZY! :)
 
I picked them up wheelen and dealing I will resale them.
 
Last edited:
braindead1684 said:
In the pic the flanges are missing that attach it to the cylinders if you get them make sure those are in place, i see them for $200 a lot, just a note you will need to reclutch as metioned hold on at 5300-7200 you take off like CRAZY! :)
Click to expand...

When I first got my 95 vmax 600 (with the gyt's), the primary was set to engage around 5100 rpm. Talk about a ride! It was absolutely worthless if you were starting in more than 4 inches of snow as it would dig halfway to china, but... give it some nice hardpack (studded track), and my internal organs would hurt from the acceleration!

No other vehicle I've driven accelerated that hard.
 
You must log in or register to reply here.


Back
Top