How good are you...?? Suspension Parts Question..

[427cobra]

Well Iam coming down to the last few parts of the suspension....

I didnt take enough pictures....

AND the manual doesnt show in enough detail to tell the difference between all these washers...

So can any of you tell me where these last few wahers go...?? I have an idea but would like a couple other opinions.

I am also wondering the order of installation of the small idler wheels.

Take a look at the pics and let me know!!

Thanks...

I believe the pair second from the left are for one of the front shocks.

 

[super1c]

I have taken these proaction skids down way too many time now. Its hard to tell exactly from the pics so here goes my best look. The first 2 from the left are the large carrier wheel washers. Their should have been a big and a small, on each side and those look like the big. They go on the inside of the wheel before you press the carrier wheel back on. Little one first. Second pick from left could be idler wheel washers. One on the outside and one on the inside before they attatch to rail. Third from left not sure at all. could be the small carrier wheel washers, but you only have three so ????. The last shiney ones are the collars for the small idler wheels you have in your pic i think. Should go from outside of wheel - Circlip, wheel, collar, washer, bushing, shaft. Best i could do with the pics you have. First check to see if any are missing from the ideas i gave ya. The three washers go me confused. Unless on is for the otherside of the small idlers and the other 2 are the small carrier wheel washers. Let us know!!

 

[tippmannator]

i havnt the slightest idea! so in order to sound smart and boost my self-esteem i will agree with everything SUPER1C said

 

[super1c]

Thats a dangerous thing to do! LOL!

 

[tippmannator]

well then lets hope for the both of us that you are right LOL!

 

[427cobra]

One lonely washer left...!!??

Its one of the three. So Im confused on this one. Did I have an extra one OR did I loose one...???

Take a look at my pics and let me know what you guys think.

I still need to install the carrier wheels. Im guessing they go between the washers and collar. OR is in just one washer, wheel, another washer, than the collar..??

Thanks for the help so far.

 

[427cobra]

The last washer....

 

[bluemonster1]

look up the yamaha parts fiche..it should show you something there.

 

[super1c]

For mine its two washers then the wheel, then the big collar for the carrier wheels. So where did the rest go? Inquiring minds what to know.

 

[427cobra]

So I have two washers then the carrier wheel...so I should be ok.

Who knows what happened before I got the sled. Maybe an extra washer got added at some point. haha

Micho Fiche isnt all that helpful because all the washers look the same. I cant tell the difference...

Getting close!!

Thanks!

 

[staggs65]

ahh the infamous spare part.. maybe youre on to something with someone putting in an extra one at some point

 

[427cobra]

Ill take another close look at the suspension and make sure nothing is missing. Just about ready to put it back in....