S snopax New member Joined Dec 24, 2009 Messages 429 Age 45 Location Wisconsin Jul 9, 2011 #1 Any tricks to getting the center jug off. I have the water rail off and 4 jug nuts. The other two slid right off, an I missing something
Any tricks to getting the center jug off. I have the water rail off and 4 jug nuts. The other two slid right off, an I missing something
bluemonster1 LIFE MEMBER ONLY ONCE!!! Joined Dec 30, 2005 Messages 12,690 Age 69 Location Howden ,Manitoba,Canada Jul 9, 2011 #2 the guide pins are probably corroded.Had 1 jug on my 600 that was that way..what a pain..a lot of spray and slowly moving sideways and upwards..took over an hour.On my SRX they just came off easily.Takes a little patience...
the guide pins are probably corroded.Had 1 jug on my 600 that was that way..what a pain..a lot of spray and slowly moving sideways and upwards..took over an hour.On my SRX they just came off easily.Takes a little patience...
bolin22 New member Joined Feb 23, 2004 Messages 438 Age 43 Location Kalispell, MT Jul 9, 2011 #3 use a dead blow gently tap side to side with some lube and it will come off.
S snopax New member Joined Dec 24, 2009 Messages 429 Age 45 Location Wisconsin Jul 9, 2011 #4 It was corrosion... Ended up using a bent needle nose pliers under the water inlet an she pried right up. What a pain.
It was corrosion... Ended up using a bent needle nose pliers under the water inlet an she pried right up. What a pain.