427cobra
New member
Hello!
I am looking for some under hood pics of your 99 Vmax Sx sleds...
(or similiar sled/year)
I m just looking for some reference pics for this weekend when I plan on putting this sled back together!
I must have been in too big of a rush when taking it apart
(I didnt take a lot of good pictures....
)
I am looking for some under hood pics of your 99 Vmax Sx sleds...
(or similiar sled/year)
I m just looking for some reference pics for this weekend when I plan on putting this sled back together!
I must have been in too big of a rush when taking it apart
(I didnt take a lot of good pictures....

If there is anything in particular your looking for I can get you pictures of it. Or just ask a question, I've had the motor out of the SX chassis before.
427cobra
New member
Were the main wiring harness should be attached to chassis would be nice. Also where all the "springs" should be installed on the fuel and oil lines.
A picture of how the coolant line from the tank runs would be helpful as well.
Thanks
Here are a few pics so far. I just layed the exhaust in place.
A picture of how the coolant line from the tank runs would be helpful as well.
Thanks
Here are a few pics so far. I just layed the exhaust in place.
Attachments
Last edited:
I'll try and get some pics for you on Monday if nobody else has. The main wiring harness will go on the side of your air box.
And this would be the only photo I could help you with right now. This kind of shows the "springs" on the fuel and oil lines. And how the harness runs under the motor.
And this would be the only photo I could help you with right now. This kind of shows the "springs" on the fuel and oil lines. And how the harness runs under the motor.

Last edited:
427cobra
New member
GREAT! I think I am on the right track.
Thanks for the pic
Thanks for the pic