I have a set of hh's I bought from Simons back in the day but have messed with them over the years and forget how they were loaded. Does anyone know and also what all is in his supertune kit? It's been along time since I ran a viper! Thanks guys!
Viper clutching
- Thread starter jminor1
- Start date
YAMMIEGOD3:16
Active member
JOSH, RUNNING ONE RIGHT NOW, 8CA. 3:16 (yamie tony)
mopar1rules
Active member
jminor1 said:
what's all done to the viper?
mopar1rules
Active member
i have a sheet in my notes folder. give me a day or two here to dig it out.
mopar1rules
Active member
Josh, sorry it took so long to get back, but here ya go:
48g base
hole #1=1/4" set screw (.9g)
hole #2=3/8" steel bolt + 1 thick washer (2.6g + 1.4g)
hole #3=3/8" steel bolt + 1 thin washer (2.6g + .4g)
black HH spring (150/300 lbs)
The H/H sheet says nothing about secondary spring. I think that a silver is too much for snow trail use on a stock viper. Green should be enough IMO.
48g base
hole #1=1/4" set screw (.9g)
hole #2=3/8" steel bolt + 1 thick washer (2.6g + 1.4g)
hole #3=3/8" steel bolt + 1 thin washer (2.6g + .4g)
black HH spring (150/300 lbs)
The H/H sheet says nothing about secondary spring. I think that a silver is too much for snow trail use on a stock viper. Green should be enough IMO.
averagesleder
New member
mopar1rules said:
Hey
Josh would be using this setup on my sled. How aggressive is this setup? I've never had a clutched sled. I've only rode my brother's srx 700 with a bender roller rooster secondary, its nice and smooth with the power delivery, but fast as heck. How much do springs sell for?
Matt