needle settings

[needaSRX]

this for a 2000 SRX 700

Do I have to move the needle setting in my carbs for 500 ft grass drags or do I leave them alone I'm running 135 mains and 50 pilots 1 3/4 turns out on the fuel screws I've looked it up and I did not find aything on needles for drag purpose

 

[YAMMIEGOD3:16]

Leave It. Do Not Drop Your Srx Down That Low. The Srx Triple Engine Loves Fuel. Don,t Be Lured Into The Lean Is Mean Way Of Thinking. 3:16 (yammie Tony)

 

[needaSRX]

I have 140's also that I can try so leave the needles were they are

 

[needaSRX]

Leave It. Do Not Drop Your Srx Down That Low. The Srx Triple Engine Loves Fuel. Don,t Be Lured Into The Lean Is Mean Way Of Thinking. 3:16 (yammie Tony)

Don't you run 133's in your SRX

 

[bluemonster1]

I can feel a burn down coming soon your way.SRX's love fuel..you are straving yours and possibly why your sled was running a little slower last season in races.Dump fuel into her and watch her rip....I am in the 147..145 zone myself and my DCS stays off.

 

[needaSRX]

this is for grass drags this weekend can't wait for snow

 

[bluemonster1]

get some sleep..you will need it ...

 

[needaSRX]

get some sleep..you will need it ...

I get lots after 12:00am LOL!!!!!!!!!!!!!!

 

[YAMMIEGOD3:16]

I Ran Exactly What You Have Here And Thought It Was Set Until I Dynoed My Srx And Saw Fuel Starvation And Had To Abort My Pull. Yammie Triple Love To Drink Gas. Drop Alittle, Not That. And No Need To Touch Your Needles. 3:16 (yammie Tony)

 

[needaSRX]

Thanks Tony 3:16