my 600 has stock clutching i would like it to have a harder pull off the bottom end i dont mind losing top speed i do alot of drift riding and i want alot more power off the take off my average riding speed is 20-50mph sometimes 80+ when i want to open the sled up like i originally stated i dont mind losing top speed i dont do much high speed riding i just love messing around in drifts carving and try to see how long i can hold the skis. i was think maybe a little bit stiffer primary spring or some heavier weights?
staggs65
Moderator
gear it down some
wich gear top or bottom i dont no much about sleds i am mainly atvs so i dont know if the gearing works that same as a quadstaggs65 said:
staggs65
Moderator
less teeth top or more teeth bottom= less top speed/more bottom end
more teeth top or less teeth bottom= more top speed/less bottom end
can't really give you the best gear combo for your type of riding (I do the opposite riding) but others will chime in for sure.
more teeth top or less teeth bottom= more top speed/less bottom end
can't really give you the best gear combo for your type of riding (I do the opposite riding) but others will chime in for sure.