first top end rebuild question

[Cheeker]

Hi all...I am currently in the process of freshening up the top end of my 97 700 mountain max and I have a question. I see a little antifreeze under the crank that i believe was caused by myself when taking the head off. What do I need to do about it? Thanks....this is my first time on my own so any help would be appreciated.

 

[DoubleClutch]

Yes the antifreeze needs to come out of the bottom of the crank case. I have used a rag and a wrachet exstendtion but be carefull not to get the rag stuck in there. my self when i have to da any engine tare down I take the bottom end apart and check the bearing and replace if needed and replace the seals. I Dont like haveing to split the bottom end after I have allready rebuilt the top end and rode it half way threw the season and the bottom end goes out. Good luck!