"black srx project"

[amatosrx]

hummm mabe ill skip the polishin job pete and just do a black out job instead

what r you building a srx.

 

[amatosrx]

i powdercoated my heads tonight with mirror black turened out awesome. here is a sneek of the motor. also polished up some parts for the next project. and here is apic of my last sled i built. i ordered a custom led smoke taillight for the seat today should look real nice.

 

[amatosrx]

i had to wait on a few parts and my new seat so i pushed it to the side and will have to finish it later. here is a pic of what it looks like. i am putting a dual pod light on still have to find one.

 

[amatosrx]

today I found a dual headlight from craigslist and I have the cowl and thanks staggs65 for the windshield. it will be better with the double headlight a little brighter and look nicer.I already have the wiring harness set up for 2 35 watt bulbs. it is a 98 motor.will post when I have the pics. going to bring a seat for my guy so he can install my new smoked led taillight and put it all together.

 

[amatosrx]

here is apic of the chrome plated hood grills and the headlight still waiting on my seat to finish it up.

 

[sleddineinar]

Also killer!!

 

[amatosrx]

well the black srx is running and almost finished still waiting on custom seat to be done but it is ready to ride. here is a few pics i have of it. still no snow to test clutching or track.

 

[amatosrx]

here is two of my windshields one for cold weather other for looking good. that is carbon fiber 3d vinyl.

 

[musselman]

I like that low windshield, looks awesome

 

[sxr70001]

Very nice work Pete!

 

[amatosrx]

here is a set of ohins i am going to put on this sled. i have a little bit of red accent on the sled so these should look nice.

 

[sxr70001]

Nice! Did you ever get your custom seat?

 

[amatosrx]

It's being made 3 weeks it is going to be all black with red stitch. And black tuning fork embroidered in the side. Also will be 1.5 inches higher and taper to 1 inch higher in the front .it will have a smoke led taillight in it.

 

[sxr70001]

That will be nice. Can't wait to see it.

 

[mrviper700]

I really like the look of carbon fiber on the shock cans, tell me where the stuff can be had at? I think I am going to copy you and do that to my clicker shock cans, should look right at home on Ol Darth.

BTW- I know you have a differnt steering pad on it already but since you mentioned the seat having red stitching, a cover from a 97 sx is black with red stitches, would match your seat cover. just an idea.

 

[amatosrx]

I really like the look of carbon fiber on the shock cans, tell me where the stuff can be had at? I think I am going to copy you and do that to my clicker shock cans, should look right at home on Ol Darth.

BTW- I know you have a differnt steering pad on it already but since you mentioned the seat having red stitching, a cover from a 97 sx is black with red stitches, would match your seat cover. just an idea.

I have a roll of it I will give u some of it.it has a real look of carbon fiber.

 

[yamahasrxman]

Nice looking sled whats the trick to get tunnel so shiny do you strip the paint an buff it or do you have to wet sand an buff

 

[amatosrx]

Nice looking sled whats the trick to get tunnel so shiny do you strip the paint an buff it or do you have to wet sand an buff

just strip and buff. need something with good power.

 

[amatosrx]

here is my new seat i had made.

 

[devinzz1]

looks textured. is it supposed to look like carbon fiber cause it looks so bad ***!