Yes carbon fiber vinyl. Thanks
"black srx project"
- Thread starter amatosrx
- Start date
jaws jr
New member
Sweet lookin sled, srx but different just what i like to see.
Pete, get some full pics of sled with it being done, looks good, want to see it from differnt angles. 
here is the pics from this weekend 20 inches of new snow rode 200 miles around gaylord.
Attachments
Last edited:
devinzz1
Active member
next project mtn srx?
super1c
Super Moderator
Was some nice snow wasnt it!! Kept an eye out for ya but we got a late start with not having power and stayed off trail for the most part. Looks like ya had fun with the SRX's. They look great!!
I seen a few packs of Yamaha but didnt see u. Went by otsego lake at dusk.
Looks good Pete!
here is 2 set of mpi arms that i have 1 is going on the black sled and the other on my ice sled. i am going to be doing a few thing to the black sled i did not get to do last year. new studs bigger guide wheels hy fax saver rear billet wheels have the hood repainted super high gloss show black it was not done good enough.
Attachments
MSASRX
New member
Suprised I never saw that sled...i guess there was quite a few sleds up there that weekend!!! I was going across Otsego lake in the evening also....Lots of snow....yet the trails were kinda choppy. Lots & lots of trees down from all the wet & heavy snow (some were on the trail ) never made up to Larry's place or the jordan river valley...we went east for most of the day on saturday and crossed back over and made it to starvation lake -then back to Otesgo lake - Fun Weekend!!!
heck at starvation lake i helped a total stranger with his 02'XC700 that would not start- had the carbs apart in the parking lot & everything-LOL!!! ended up being the fuel pick-up tube inside the tank fell off the "nipple" and yet he still had 1/4 tank of gas...yet was out of fuel because it would go below the location of the nipple on the tank......got him back on the trail - free beer is good!!!
heck at starvation lake i helped a total stranger with his 02'XC700 that would not start- had the carbs apart in the parking lot & everything-LOL!!! ended up being the fuel pick-up tube inside the tank fell off the "nipple" and yet he still had 1/4 tank of gas...yet was out of fuel because it would go below the location of the nipple on the tank......got him back on the trail - free beer is good!!!
here is some updates from the the black srx . this year i put a new kimpex traxion 121 with new studs also put on mountain perf chromoly arms bender lightweight control arms lightweight spindles from a mountain srx alum steering arms also a new custom yamaha bar pad cut down and sewn in with a srx logo also had the hood repainted the most shiny black possible it is flawless not even a ripple in it. Also changed like 40 bolts to polished stainless added alot more billet parts to it also replaced all ball joints and heims with new. also put all 6 oversized wheels including some 7 3/8 rear billet wheels I also put new black viper grips and bars.my 12 year old son will be driving this sled this year he cant wait to ride.
Attachments
Last edited:
Devilin AblueDress!
New member
What is that seat on the blue one in the back ground? Looks kind of like a viper but kind of doesnt?
prostock28
New member
............
nice work!!!!!
nice work!!!!!
Full custom viper hightop seat I had made.Devilin AblueDress! said:
I have a 2001 motor on my table I am going to build a all new motor for this sled. I am going to update the harness and make it a legit 01. I have a set v force reeds also have mr viper doing me a peak perf head I had. Also will put ported pistons and light rods in it. I also might port the cylinders I have like 17000 miles plus on this motor and oil pump . I have had this sled since 99 doesn't owe me a thing. I also want to put a set of black c and a skis on it.
super1c
Super Moderator
Very nice as always pete! You da MAN!
That's pretty fancy for "the wife's" sled. 