trimming track

[bkas2724]

wanted to some ideas of what works best for trimming track to clear exchanger protectors

 

[modsrx]

the best thing to trim a track its a razor blade with water ......sounds stupid but this is the only thing work the best on rubber

 

[mattyg1405]

x2 get some new razor blades and be careful not to cut your finger off

 

[modsrx]

^^^^^^x2 don't forget the water

 

[super1c]

I used a set of flat head nail cutters on my ultimate traxion. Perfect width. What size track are you clipping. For a 1" i only had to clip about a 1/8" off.

 

[A couple of bucks]

Dremel w/ an router type attachment & end mill bit.

 

[bkas2724]

thanks for the advice, guess i will see what woks the best... (and try not to lose a finger)

 

[Sno-Xr]

I used a set of flat head nail cutters on my ultimate traxion. Perfect width. What size track are you clipping. For a 1" i only had to clip about a 1/8" off.

I used the same, works great