bluemonster1
LIFE MEMBER ONLY ONCE!!!
that is not stopping me..lol got the itch
u guys know how to make a hydrogen cell right? there is a very crude way to go about it. with using household materials. all u need is 2 pieces of stainless steel, baking soda, water, a plastic container with a vent on the cap ie. hose. , and a charged battery and some wire. its called splitting atoms through electrolosis. to achieve hydrogen. ive built these before. just tinkering, and a buddy of mine runs one in his car. WARNING. hydrogen is explosive!!!! basically small scale, use 2 stainless hose clamps. stretch them out to flat. these will be the electrodes. space them around around 8th inch or so from eachother its kinda trial and error.. DO NOT LET THEM TOUCH EACHOTHER! hook your pos wire to one electrode and negative to the other. put them in a plastic bottle. add water and baking soda and drill a vent for a hose in the top of the bottle along with holes that will need to be sealed for the wires to run out. i am unsure of exactly how much baking soda to add. it all depends on how much water you use. now hook up to your 12 volt power supply and look for bubbles being generated from between the 2 electrodes. these bubbles are pure hydrogen!!! it is recommended to build a baffle to keep the bottle from expolding in your face if accidently lit. all that consists of is the outlet hose running to another plasttic bottle with just water in it. run the primary hose under water and the bubles will emerge from this and run a vent off the secondary botltle. so now if the hydrogen is lit it wont ruin you whole rig. ittle just pop. in the secondary baffle. be careful with the water in the primary bottle with baking soda as well. over time through eletrolosis. it will turn acidic kinda like battery acid. but not quite as potent. just food for thought. it works. ive done it many times. but never put it to beneficial use. like my friend did with his car. a bigger crude cell could be made using 2 stainless spatulas and a 5 gallon bucket. i thought it was cool when my friend taught me how to do it so i figured id share. i should also say when making this do not fill your cell to the top. just make sure your electrodes are fully submerged. about 3/4 from top is good.
Last edited:
where i am located in binghamton 40 miles south in northeast pa. there is a natural gas boom happening. my mom owns land in northeast pa / hallstead /montrose area. and they are putting up 100s of natural gas rigs in this area. they are extracting out of a shale bed and the gas pressures are unlike they have ever seen once they do thier fracking. when they burn off the excess pressure so the well can sustian itself it lights up the night sky for miles. its crazy. my mom owns a house and land right in the heart of it and they gave her 60,000 for a 5 year lease and if a well lands just near her property she will make 100 dollars per acre per day at minimum she owns 20 acres so that is 2000 a day min. just royalty fee. i guess there is enough natural gas i work at damascus 535 quarry and stone product and we supply material to help them build thier gas pads. and as of right now there are 5 more pads simotaniously going up as we are helping supply for them. they are also running permanent pipelines out of the area. there are tons of texas plates running around the area right now. helicopter drops with packages that land out in the woods with wire rolls etc. for sizemic testing. they set off a charge and some how that tells em were they need to drill. absolute madness in this area right now. its like a new age gold rush.fastmax said: