Looking for a little low end torque

[nojokef7]

I'm running Bender pipes, 51/43 Helix, 89-L weights w/2.4g rivets, stock springs, and stock gearing. Jetting: 150 mains......Looking for a little more low end grunt for trail. Whats my best bet gearing, clutching? Can anybody help me out???

 

[bluemonster1]

just drop down 1 tooth upper gear from stock gear...that will give you a little more boost.

 

[s fortuna]

mine has a exhaust pipe spacer in it . y pipe to cly . gains in the low end . no not maid any more i dont even know who made them , but glad i got them . about 1/4 in thick

 

[s fortuna]

a peak head will wake it up also

 

[nojokef7]

just drop down 1 tooth upper gear from stock gear...that will give you a little more boost.

So I should go to a 21 tooth upper gear?....i do have one layin around actually

 

[SWEDE]

I would and you'll need a 68 link chain also to work with that assuming your lower gear is a 39 tooth.

 

[bluemonster1]

your stock gearing is 22/39 with 70 link chain,you'll have to drop to 68 link then with a 21 upper gear.

 

[nojokef7]

your stock gearing is 22/39 with 70 link chain,you'll have to drop to 68 link then with a 21 upper gear.

Ok you wouldn't know the part # on the chain would ya??

Thanks for the info too by the way!

 

[bluemonster1]

should be #94860-02068-00 for 68 link

 

[nojokef7]

Hey BlueMonster would you know the part # for that 21 tooth gear cause the one I have I think it might be for Skidoos

 

[bluemonster1]

off hand I don't,,but will look for it.I actually have a 21 tooth here I am not using..

 

[bluemonster1]

from the invoice I have here it is #89J-17682-10-00.

 

[nojokef7]

ok, yeah thats what i found too on internet....thank you very much!