Polaris clutching question

Concept Carbon

Concept Carbon

New member
Joined
Jan 31, 2006
Messages
1,188
Age
45
Location
Ottawa, ON.
I now own 2 polaris's a 02 600 edge twin and a 08 500 efi atv. I would like to do some clutching mods but I am a bit scared off by the spaceship looking secondary, and the lack of info on polaris stuff.

Is there a way to adjust the spring tensing in the secondary? If anybody knows anything on these clutchs please pipe up anything at all.

Thanks jay
 
is that a team secondary on the edge? team industries used to have a good tutorial on their website. beyond that, i have minimal experience with the poo clutches. if it has perc, i have found no pre-loads on the spring. seems like the helix does the work and the spring floats for the reverse. easy enough to make your own compression tool if need be for the non team secondary.

i have only opened up a team once, its a pita, and confusing compared to the yamaha ones, but as i recall, the tutorial was informative. its been a few years.
 
Thanks guys, im going to have to mess with my atv clutch when i go to 27" from 25" tires. makes me really love yamahas simple setup
 
You must log in or register to reply here.


Back
Top