Gitterdun1985
New member
Need a good clutch setup for 1000 feet
sled has bender quads so should be running at 9000rpm correct me if im wrong.
sled has bender quads so should be running at 9000rpm correct me if im wrong.
YAMMIEGOD3:16
Active member
23/ 37 GEARING, YAMAHA W-W-W SPRING , NEED TO ADD WEIGHT TO THE STOCK WEIGHTS (8bu). 4.5. RIVETs INNER AND TIP. STOCK SPRING (silver) IN SECONDARY, INCREASE TWIST TO 90 3-6. i like to see ya around a 51/38 cam, 9000 is PEAK. quads add hp on this engine. benders were 14HP so you must add weight to primary. i have tested benders, psi and reichards on my 96 vmax 800. 3:16 (YAMMIE TONY)
Gitterdun1985
New member
thanks Yammie Tony, so should my clutch enguagment be around 54-5500
I am not a V4 guy but that engagement seems quite a bit harsh, especially for a WWW spring
YAMMIEGOD3:16
Active member
4800- 5000. YOU CAN ADD A ENGAGEMENT SHIM OR TWO TO FINE TUNE. YOU DON,T NEED A HIGH ENGAGEMENT FOR SPEED RUNs. 3:16 (yammie tony)