T triplexxx New member Joined Sep 11, 2003 Messages 36 Dec 5, 2003 #1 Just got done with cleaning the carb's on my V-max-500. I notice that there was a coolant line that went to the carb and I had to disconnect it. Is it necessary to bleed the coolant system since I disconnected that one line
Just got done with cleaning the carb's on my V-max-500. I notice that there was a coolant line that went to the carb and I had to disconnect it. Is it necessary to bleed the coolant system since I disconnected that one line
S sfury64 New member Joined Nov 1, 2003 Messages 9 Location Ruthton, MN Dec 5, 2003 #2 you might want to just run it a little and then check the lovel in the tank to be sure you didn't loose to much. Otherwise it should be ok.
you might want to just run it a little and then check the lovel in the tank to be sure you didn't loose to much. Otherwise it should be ok.
T triplexxx New member Joined Sep 11, 2003 Messages 36 Dec 5, 2003 #3 coolant level sounds like a plan. I'll try that and see what happens.