what are these

[reyes1]

I took my jugs off and later noticed i was missing some of these. some went with the jug some stayed with the case some i have no idea where they went.
if i could get part number and were the best place to find them is io would appreciate it.

 

[Devilin AblueDress!]

Alingment pin/dowels.Does it look like each jug had 4 to begin with? I dont know that all are necesary. I dont think my sxr had all 4 in it from the factory.

 

[reyes1]

i guess i dont know. i figured that every jug had 4 each. maybe some one will chime in so i know for sure.

 

[Devilin AblueDress!]

If you look at the holes does it look like something was just in there? or does it look like its ben empty for a decade?

 

[srx700c]

Yamaha parts fiche shows 6 dowels for 01 SX700R

 

[srx700c]

PIN,DOWEL #99510-10114-00 (replaces 99530-10114-00)
Available thru your local dealer, or Port Yamaha (advertiser on this site), or post up a wanted add and someone may have them.

 

[sleddineinar]

If my memory serves me I think the redhead has 2 per cylinder.

 

[reyes1]

ok then i am not missing any. thanks guys you always point me in the right direction

 

[HndaTch627]

generally there's only 2 dowels per cylinder since that's all you need to align it. Anymore would make it challenging to get apart.